13051 All Picture Files*.Bmp;*.Wmf;*.Emf;*.Ico;*.Dib;*.CurBitmaps(*.Bmp;*.Dib)*.Bmp;*.DibMetafiles(*.Wmf;*.Emf)*.Wmf;*.EmfIcons(*.Ico;*.Cur)*.Ico;*.CurAll Files(*.*)*.*
13176 Key save area for Visual Basic Design Environment
13177 The project name and the .EXE filename for both applications are the same. Change the Project Name setting in the Project Options dialog box and use a unique name for the current .EXE file.
13178 The project name is the same for both applications. Change the Project Name setting in the Project Options dialog box.
13179 The .EXE filenames for the two applications are the same. Specify a different filename for the current .EXE file.
13180 Your application is incompatible with |1.\n\n
13181 No conflicts will occur, however, because the project name and .EXE filename are different.
13182 \n\nYou can see the specific incompatibilities by returning to design mode and running the project.
13183 The |1 member was found in the |2 class module of the Compatible OLE Server, but not in the current project.
13184 If you choose Accept, the |1 class module will no longer support OLE Automation controllers compiled against the Compatible OLE Server.
13185 To avoid this incompatibility, add the declaration back into the class module, or clear the Compatible OLE Server setting in Project Options.
13186 The |1 class module was found in the Compatible OLE Server, but not in the current project.
13187 If you choose Accept, the project will no longer support OLE Automation controllers which access the |1 class and were compiled against the Compatible OLE Server.
13188 To avoid this incompatiblity, add the |1 class back into the project, or clear the Compatible OLE Server setting in Project Options.
13189 |1 in the |2 class module has arguments and/or a return type that is incompatible with a similar declaration in the Compatible OLE Server.
13190 If you choose Accept, the |1 class module will no longer support OLE Automation controllers compiled against the Compatible OLE Server.
13191 To avoid this incompatibility, edit the declaration to be compatible, or clear the Compatible OLE Server setting in Project Options.
13192 The Name property of the current project |1 is different from the name of the Compatible OLE Server |2.
13193 To avoid this incompatiblity, change the Project Name, or clear the Compatible OLE Server setting in Project Options.
13194 All
13195 Down
13196 Up
13197 Code Window Text
13198 Selection Text
13199 Syntax Error Text
13200 Breakpoint Text
13201 Next Statement Text
13202 Comment Text
13203 Keyword Text
13204 Identifier Text
13205 Missing:
13206 High
13207 Medium
13208 Low
13209 Draft
13210 OK
13211 You are not able to Make EXEin the Visual Basic Working Model.Make EXE is enabled in allother versions of Visual Basic 4.0
13212 The Data Manager, a Visual Basic tool that allows youto build databases using the JET database engine,is not available in the^^
13213 Working Model.The Data Manager is enabled in all other versionsof Visual Basic 4.0.To test the Data Access^^
13214 functionality in Visual Basic,please use the database (BIBLIO.MDB) included withthe Working Model.
13215 You may only load or create projects with twomodules (Forms, MDI Forms, Modules, Classes)in the Visual Basic Working^^
13216 Model.Projects may contain an unlimited (systemdependant) number of modules in otherversions of Visual Basic 4.0.
13217 Working Model for
13218 32-bit Windows Development
13219 %s support file
31001 Out of memory
31003 Can't open Clipboard
31004 No object
31006 Unable to close object
31007 Can't paste
31008 Invalid property value
31009 Can't copy
31017 Invalid format
31018 Class is not set
31019 Source Document is not set
31021 Invalid Action
31022 Unable to initialize OLE
31023 Invalid or unknown Class
31024 Unable to create link
31026 Source name is too long
31027 Unable to activate object
31028 Object not running
31029 Dialog already in use
31031 Invalid source for link
31032 Unable to create embedded object
31033 Unable to fetch Link source name
31034 Invalid Verb index
31035 Incorrect Clipboard format
31036 Error saving to file
31037 Error loading from file
31038 This control requires VB version 3.0 or greater
31039 Unable to access source document
31040 You cannot set DisplayType while the control contains an object
50000 Incompatible version of WIN87EM.DLL; quitting
50001 Unexpected error; quitting
50002 Not enough memory to run; quitting
50003 Stop statement encountered
50004 Wrong version of run-time DLL
50005 Wrong version of operating system; requires Windows NT 3.51 (build |1 or above), or Windows 95 (build |2 or above)
50010 Internal error: '|1'
50011 Bad file name or number: '|1'
50012 File not found: '|1'
50013 Bad file mode: '|1'
50014 File already open: '|1'
50015 unused
50016 Device I/O error: '|1'
50017 File already exists: '|1'
50018 Bad record length: '|1'
50019 unused
50020 Disk full: '|1'
50021 Input past end of file: '|1'
50022 Bad record number: '|1'
50023 Bad file name: '|1'
50024 File previously loaded: '|1'
50025 Tried to load module with duplicate procedure definition: '|1'
50026 Too many files: '|1'
50027 Device unavailable: '|1'
50028 unused
50029 Permission denied: '|1'
50030 Disk not ready: '|1'
50031 unused
50032 Unable to load control from: '|1'
50033 unused
50034 Path/File access error: '|1'
50035 Path not found: '|1'
50050 Must have startup form or Sub Main()
50051 Incompatible version created '|1'
50052 Can't save file to TEMP
50054 The file, '|1', is invalid. Only forms, modules, and classes can be added to the project using Add File. Use the Tools menu in order to add Controls or References to the project.
50055 Unrecoverable Error: A project could not be created, terminating Visual Basic.
50056 '|1' is a VB1 form and cannot be loaded into VB4.
50057 '|1' could not be loaded.
50058 The basic code in '|1' was corrupt, and couldn't be loaded.
50059 The project file '|1' is corrupt, and can't be loaded.
50060 Search string is too long
50061 Can't delete module; must Re-Initialize first
50062 Unable to get system fixed font
50063 A module with this name exists
50064 Invalid procedure name
50065 Nothing to search for or replace
50066 Not enough room to paste contents into current line
50067 Can't set next statement
50068 Search text not found
50069 Text too long to edit
50070 One or more replacements too long and not made
50071 Syntax errors produced while replacing
50072 An undo error has occurred. Further undo is unavailable.
50073 Watch expression too long, expression truncated
50074 An expression must be selected
50075 Search string has unmatched brackets
50076 Error reading Tutorial file '|1'
50077 Tutorial directory '|1' not found
50078 Can't find file '|1'
50079 Not enough memory to load file
50090 Duplicate procedure name
50091 Can't find Windows Help .EXE file
50092 Can't empty Clipboard
50093 Can't open Clipboard
50094 Can't use character device names in file names
50095 Can't display system information
50096 Invalid procedure name
50097 A procedure of that name already exists
50098 The application description can't be more than 2000 characters long
50130 Control must be same type as rest of array
50131 Array already has control at index '|1'
50132 Not a legal object name: '|1'
50133 Must specify which item(s) to print
50134 Can't clear Index property without changing Name
50135 '|1' is a class name
50136 '|1' is a control name
50139 Controls without the align property cannot be placed directly on the MDI form
50140 File is read-only
50141 Project file is read-only
50150 Event handler must be a Sub procedure
50151 Incorrect number of event procedure arguments
50152 Event procedure argument has incorrect data type
50170 Menu item skipped a level
50171 Can't put check mark here
50172 Can't assign shortcut key to a top level menu
50173 Can't use separator bar as menu name
50174 Menu control must have a name
50175 Menu control array element must have an index
50176 Menu control array indexes must be in ascending order
50177 Menu control array elements must be contiguous and within the same submenu
50178 Shortcut key already assigned
50179 Separator may not be checked or disabled, or have a shortcut key
50180 At least one submenu item must be visible
50181 Separator may not be the Window List menu
50182 Can't have more than one Window List menu
50183 Only Top Level Menus can have non-zero NegotiatePosition
50200 Valid range is 1 to 32
50201 Valid values are whole numbers from 24 to 1188
50202 Option Explicit
50203 Project Name '|1' is invalid
50220 New not allowed on this type
50221 Main can't be module, type, project, or form name
50222 A DLL must use Sub Main() as its entry point
50235 You need to fill in the DatabaseName and/or Connect properties of the Data Control to complete this operation.
50236 You need to fill in the RecordSource property of the Data control to get a list of field names.
50240 Project too large too make into an EXE.
50241 Version numbers must be in the range 0 to 9999
50242 Invalid Base Address
50243 No creatable public class module detected.\nPress F1 for more information.
50245 Only one resource file allowed
50246 Duplicate resources with same type and name
50250 Programmatic ID string too long '|1'
50251 The name '|1' contains invalid characters when part of a Programmatic ID
50252 Registration information too large to make into an EXE
50253 OLE Server could not be created
50254 The Public property for Class |1 cannot be set to True. You do not have an appropriate license to use this functionality in the design environment.
50255 The file '|1' does not contain information needed to create a compatible OLE server.
50256 The Instancing property for Class |1 cannot be set to Creatable SingleUse for a DLL
50257 The Visual Basic development environment is acting as a single-use server for the requested OLE object and can't provide multiple instances of that object. Consult the documentation for restrictions on single-use OLE classes.
50260 Do you want to upgrade all |1 objects in this project to |2 objects?
50261 The class name of the newly upgraded |1 objects is |2. Since this is different from their previous name of |3, you must change any declarations of this object that you have in code.
50262 All |1 objects in this project will be upgraded to |2 objects.
50270 Could not find Data Access Library. Cannot Create reference.
50271 Can't exit Windows while an OLE object is active for editing.
50272 SHARE.EXE must be installed in order to run Visual Basic
50274 RecordSource property of the associated data control is empty.
50275 Visual Basic was not able to start up due to an invalid system configuration.
50277 Unable to launch Books Online.
60001 Can't remove control or reference; in use
60002 Can't quit at this time
60003 This action cannot be completed because the |1 application (|2) is not responding. Choose "Switch To" to activate |1 and correct the problem.
60004 This action cannot be completed because the |1 application (|2) is busy. Choose "Switch To" to activate |1 and correct the problem.
60050 Invalid command line argument '|1'
60051 Save changes to '|1'?
60052 You already have a control named '|1'. Do you want to create a control array?
60053 Error loading '|1'. The code associated with this form could not be loaded. Continue loading form?
60054 Error loading '|1'. An error was encountered loading a property. Continue?
60055 Error loading '|1'. A control could not be loaded due to load error. Continue?
60056 '|1' has old file format.
60057 Replace existing '|1'?
60058 '|1' doesn't exist
60059 '|1' already exists in project
60060 '|1' is a Read-Only file
60061 Errors during load. Refer to '|1' for details
60062 '|1' could not be loaded
60063 Version number missing or invalid; Visual Basic 4.0 assumed.
60064 String value too long to process; form load aborted
60065 One or more files in the project have changed. Do you wish to save the changes now?
60066 '|1' could not be registered
60067 Binary Translator, VBTRANS.EXE, could not be run. Basic module '|1' not loaded.
60068 Binary Translator, VBTRANS.EXE, could not be run. Code portion of form '|1' not loaded.
60069 Other applications are currently accessing an object in your program. Ending the program now could cause errors in those programs. End program at this time?
60070 One or more of the properties in '|1' was bad. Some or all of the properties might not be set correctly.
60071 '|1' could not be loaded.\n\nRemove it from the list of available Add-Ins?
60072 Visual Basic cannot load '|1' because it is not in the system registry.\n\nPlease ensure that all Add-Ins have been installed correctly.
60073 The form name for file '|1' is different than the module name. Visual Basic will use the form name.
60074 Forms must always be non-public and non-creatable. Resetting form |1 to default values.
60075 The declaration in the Compatible OLE Server was:\n\n|1
60076 Visual Basic can't upgrade the custom controls to those provided in the '|1' library. Remove this library from the list of available upgrades?
60077 Visual Basic found an instance of '|1' in a binary form file. VBX's cannot be converted from binary form files in the 32-bit version.
60078 An error occured while background loading module '|1'. Background load will now abort and the code for some modules may not be loaded. Saving these modules to their current file name will result in code loss. Please load a new project.
60100 Line |1: The Form or MDIForm name |2 is not valid; cannot load this form.
60101 Line |1: The control name |2 is invalid.
60102 Line |1: The property name |2 in |3 is invalid.
60103 Line |1: |2 has a quoted string where the property name should be.
60104 Line |1: Property |2 in control |3 had an invalid property index.
60105 Line |1: Property |2 in |3 could not be loaded.
60106 Line |1: Property |2 in |3 must be a quoted string
60107 Line |1: Property |2 in |3 had an invalid value.
60108 Line |1: Property |2 in |3 had an invalid file reference.
60109 Line |1: Property |2 in |3 could not be set.
60110 Line |1: Class |2 of control |3 was not a loaded control class.
60111 Line |1: Did not find an index property and control |2 already exists.
60112 Line |1: Control name too long; truncated to |2.
60113 Line |1: Class name too long; truncated to |2.
60114 Line |1: Syntax error: property |2 in |3 was missing an '='.
60115 Line |1: Parent menu |2 cannot be loaded as a separator.
60116 Line |1: Cannot set checked property in menu |2. Parent menu cannot be checked.
60117 Line |1: Cannot set shortcut property in menu |2. Parent menu cannot have a shortcut key.
60118 Line |1: The name |2 is already in use as a |3 name.
60119 Line |1: The Form or MDIForm name |2 is already in use; cannot load this form.
60120 Line |1: The file |2 could not be loaded.
60121 Line |1: Maximum nesting level for controls exceeded with |2.
60122 Line |1: All controls must precede menus; cannot load control |2.
60123 Line |1: Cannot load control |2; containing control not a valid container.
60124 Line |1: Cannot load control |2; name already in use.
60125 Line |1: Missing or invalid control class in file |2
60126 Line |1: Missing or invalid control name in file |2.
60127 Line |1: Cannot load properties into |2. Reverting to default properties.
60128 Line |1: Cannot create embedded object in |2; license not found.
60129 Line |1: Cannot create embedded object in |2.
60130 Line |1: Cannot load control |2; license not found.
